The thermal dehydration of aluminum trihydroxide (gibbsite) can lead to the formation of χ, κ, ρ, η or θ transition aluminas, depending on the heating rate, the dwell temperature and the atmosphere in contact with the solid phase [1], [2] and [3]. The thermal dehydration of boehmite can afford γ, η, δ, or θ phases, depending on the conditions of dehydration, the particle size and degree of crystallinity of the starting boehmite. Pseudoboehmite, a poorly Pifithrin-�� concentration ordered

form of boehmite with a small primary particle size, is often a preferred precursor to transition aluminas, because it typically affords derivatives with relatively high surface areas and pore volumes. Particularly, γ alumina (γ-Al2O3) is formed from well ordered boehmite at a temperature over 500 °C, depending on the particle size. Pseudoboehmite can be transformed

to η alumina upon dehydration [1], [2] and [3]. Carboxylate-alumoxanes are prepared from the reaction of boehmite [Al(O)(OH)]n with carboxylic Ibrutinib chemical structure acid (HO2CR). Although, they are given the general formula, [Al(O)x(OH)y(O2CR)z]n where 2x + y + z = 3 and R = C1–C14 [1], carboxylate-alumoxanes are in fact alumina nanoparticles between 5 and 200 nm in diameter. The surface of the nanoparticle is covered with covalently bound carboxylate groups [4] and [5]. Some of the simple carboxylic acids which have been used are: acetic acid, methoxyacetic acid, methoxy (ethoxy) acetic acid, methoxy (ethoxy ethoxy) acetic acid, hexanoic acid etc. Some of the carboxylic acids containing other functionalized groups are: 4-hydroxybenzoic acid, 4-aminobenzoic acid, methacrylic acid, hydroxylacetic acid, aminoacetic acid, 6-aminohexanoic acid, lactic acid, l-lysine etc [4]. Carboxylate-alumoxanes have found applications in a variety of interesting fields, such as the following: synthesis of metal doped aluminum oxides, catalyst components, preparation of ceramic membranes, synthesis of hollow alumina spheres, strengthening of porous alumina ceramics, and fabrication of fiber reinforced ceramic matrix composites, fabrication of biocompatible nanocomposites, polymeric Isoconazole nanocomposites, performance improvements

of lithium batteries, non-skid and non-flammable coatings and MRI contrast agents [6] and [7]. In this sense, we have developed a method for the control of the porosity and pore size distribution on the synthesis of γ-alumina: reacting boehmite with a mixture of carboxylic acids from the extract of rosin, to produce carboxylate-alumoxane nanoparticles; drying the carboxylate-alumoxane nanoparticles; and firing the dried nanoparticles at a temperature of 650 °C. The rosin, main components of the colophony extract, is a mixture of isomeric cyclic carboxylic acids with the general formula C19H29COOH and it is produced by heating fresh liquid oleoresin to vaporize the volatile liquid terpene components [8] and [9].