The process required 6 h at 180°C [13] Synthesis of azo initiato

The process required 6 h at 180°C [13]. Synthesis of azo initiator (4,4′-Azobis (4-cyanovaleric acyl chloride)) ACVA (1.4 g) was dissolved in 40 ml dichloromethane. About 9 g of PCl5 was taken in 50 ml dichloromethane. Then, the ACVA solution was added to the reaction mixture. Throughout the reaction, the temperature was maintained below 10°C [14]. The reaction mixture was kept for 48 h under nitrogen atmosphere. The purified product was obtained

by rotary evaporation and extraction with hexane. Immobilized VEGFR inhibitor ACVC on CSs The schematic diagram of the synthesis process of CSs immobilized with ACVC is shown in Figure 1. About 0.4 g CSs was put in 10 ml anhydrous toluene; 3 ml triethylamine was added as catalyst. About 3.17 g ACVC was dissolved in 30 ml anhydrous toluene. Then, the ACVC solution was added drop by drop to the reaction mixture and learn more kept for 24 h with stirring at room temperature under nitrogen atmosphere. After the reaction, the crude product was washed by toluene and dried under vacuum for 24 h at 25°C to

obtain the purified product (CSs-ACVC). Figure 1 Modification process of carbon spheres. (a) Single-ended form grafted on CSs, (b) double-ended form grafted on hetero-CSs, and (c)  double-ended form grafted on homo-CSs. Surface modification of CSs by grafting polyelectrolyte brushes A certain amount of CSs-ACVC, a solution of diallyl dimethyl ammonium chloride, and distilled water (1/1 v/v) were put in a flask. Ultrasonic treatment was used to ensure that the mixture solution triclocarban is dispersing uniformly. Then, the system was carefully degassed to remove

the oxygen in 30 m and then the polymerization from the surface of CSs-ACVC was carried out at 60°C. Within 9 h, cation spherical polyelectrolyte brushes (CSPBs) were obtained. To gain pure CSPBs, the product was purified with distilled water by Soxhlet extraction. The substance existing in the washing liquor of CSPBs was testified to be p-DMDAAC. Because the weight-average molecular weight of the washing liquor of CSPBs was equal to that of p-DMDAAC grafted on the surface of CSs (p-DMDAAC-CSs), p-DMDAAC in washing liquor of CSPBs (p-DMDAAC-WL) can be collected to characterize the weight-average molecular weight of p-DMDAAC-CSs. Characterization When Fourier transform infrared spectroscopy (FTIR) (Nicolet AVATAR 360FT, Tokyo, Japan) was used to Erismodegib research buy analyze the structure of the obtained products, the morphology of the CSPBs was characterized by scanning electron microscope (SEM) (Quanta 200, Holland, Netherlands). The weight of p-DMDAAC-CSs was calculated by thermogravimetric analysis (TGA) (SETSYS-1750, AETARAM Instrumentation, Caluire, France). The weight-average molecular weight of p-DMDAAC-CSs was determined by gel permeation chromatography (GPC) (Waters 2410 Refractive Index Detector, Waters Corp., Milford, MA, USA).

Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>